Direct Boxes - Direct Boxes connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone.
SM Pro Audio DI 1 - Direct Box
Product Detail:
SMPro Audio DI-1 Direct Injection Unit
The DI-1 is a compact high quality active direct injection box. Used in both studios and on the road it will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise. Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone.
Input Impedance: > 250k Ohm
Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
Connectors: Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced), Jack: Tip Hot (+ve) Sleeve Ground, XLR: Pin 2 Hot (+ve) Pin1 & 3 Ground
Output impedance:> 600 Ohms
Output connector: XLR balanced
Distortion: (THD) < 0.005% at 1kHz, 0dBu
Output Noise: <-100dB unweighted
Frequency response: 10Hz to 70kHz, +0dB/-3dB
Main/Standby: 9 volt battery
Phantom Power: +18 volts DC to +48 volts DC
$34.99
QTY:
Mic Thing Microphone Isolater
The Mic Thing is a portable multi-purpose acoustic treatment panel suitable for minimizing room artifacts and improving separation during microphone recording sessions. Great for a range of applications including helping to control room ambience, minimizing spill from instrument amplifiers, or even creating temporary control rooms the Mic Thing is certainly one handy thing!
Good microphone separation and isolation means a cleaner recording and more controlled end result. Although the question of how much microphone separation is really necessary in any given situation, audio engineers around the world unanimously agree that if given the chance, they would rather be in control of these factors than not.
The Mic Thing can be mounted on just about any microphone, drum, or speaker stand up to 1” (25mm) in diameter. The Mic Thing’s two winged panels can also be adjusted to create anything from a flat planar absorber to a tight semi circle enclosing the microphone. This way, the amount of separation and absorption can be easily be manipulated to suit requirements.
$219.00
QTY:
Hosa Active DI
Boost guitar and bass signals up to line level for direct-to-mixer connections via either Low-Z or Hi-Z inputs.
"Amp-In" feature allows your amplifier's speaker output to feed the console. Now your amplified sound can go directly into the console without time consuming microphone selection and placement.
Ground Lift Switch breaks "ground-loops" reducing 60-cycle hum.
Rugged die cast aluminum chassis for incredible strength.
